-
ProductsService and SupportBusiness consultation hotline：
-
-
Service and SupportBusiness consultation hotline： -
Support
Service and SupportBusiness consultation hotline： -
Service and SupportBusiness consultation hotline：
相关产品
Voltage Range: 11KV – 33KV
Power Capacity: 50KVA – 20MVA
High Efficiency: Up to 99.7% (Reduces Grid Losses)
Installation Types: Ground Mounted | Pole Mounted | Platform-Mounted,etc.
AISITE 20KV Dry-type Three-Phase Transformers have the features of low loss, loss noise. And it is resistant to temperature changes. The primary voltage ratings vary from 35KV to 38.5KV. The rated power is from 50KVA to 2500KVA, which can meet the most requirement for dry-type transformers usage.
Non-encapsulated Dry type transformer
These transformers are made with a magnetic core from laminated grain-oriented silicon steel. Additionally, HV winding can also be wound from insulated by an inter-layer film, pre-impregnated with heat-activated epoxy resin. The ends of the windings are protected and insulated using Class F materials. With outstanding resistance to harsh industrial atmospheres, excellent dielectric withstand and very good resistance to short-circuit conditions are ideal for industrial and commercial use.
Cast resin transformer ( Dry type transformer)
These transformers are made with a magnetic core from laminated grain-oriented silicon steel. Additionally, HV winding can also be wound from insulated by an inter-layer film, pre-impregnated with heat-activated epoxy resin. The ends of the windings are protected and insulated using Class F materials. With outstanding resistance to harsh industrial atmospheres, excellent dielectric withstand and very good resistance to short-circuit conditions are ideal for industrial and commercial use.
Cast resin transformer ( Dry type transformer)
These transformers are made with a magnetic core from laminated grain-oriented silicon steel. Additionally, HV winding can also be wound from insulated by an inter-layer film, pre-impregnated with heat-activated epoxy resin. The ends of the windings are protected and insulated using Class F materials. With outstanding resistance to harsh industrial atmospheres, excellent dielectric withstand and very good resistance to short-circuit conditions are ideal for industrial and commercial use.