How Many Transformers Fit in a 40ft Container? The Three Limits That Decide Your Loading Plan
Short answer: the number is the lowest of three limits: weight, floor footprint and height. For oil-filled units above a few hundred kVA, weight usually wins, so two 20ft containers can carry more than one 40ft.
Freight is a real part of the landed cost of distribution transformer shipping, and it is the part buyers rarely plan until the forwarder's quote arrives. This guide from a transformer manufacturer in China explains the three limits behind transformer container loading, shows a worked example, and lists what to put in your RFQ so the loading plan is agreed before the price.
The three limits
1. WeightPayload is usually reached first by heavy oil-filled units.
2. FootprintTwo units across must leave room for blocking and lashing.
3. HeightThe door opening is lower than the internal height — check tall bushings and conservators.
Figures are representative; ask the forwarder for the released unit's exact specification before you finalize a tight fit.
Worked example (assumed numbers)
40ft dry: floor space gives 6 rows × 2 across = 12 units; payload gives 26.5 t ÷ 3.2 t = 8 units. Weight limits it to 8.
20ft dry: floor space gives 3 rows × 2 across = 6 units; payload gives 21.7 t ÷ 3.2 t = 6 units. Both limits agree at 6.
Result: eight units fit in one 40ft, but two 20ft carry twelve. Ask for both quotes.
1 × 40ft8 unitsweight-limited
2 × 20ft12 unitsfloor and weight agree
Which container for which unit
← swipe the table →
| Situation | Container | Why |
|---|---|---|
| Heavy units, several per shipment | 2 × 20ft dry vs 1 × 40ft | Weight limits the 40ft; compare per-unit freight |
| Light or bulky units (dry-type, enclosures) | 40ft high-cube | Space and height limit before weight does |
| Overall height above the door opening (HV bushings, conservator) | Open-top, or remove parts for separate packing | Standard doors are about 2.26–2.28 m; high-cube about 2.59 m |
| Very heavy or over-width cargo | Flat rack | Surcharges and availability apply; plan early |
| One or two small units | Avoid LCL if possible | More handling means more damage risk to bushings and radiators |
Compact, lower-profile constructions such as hermetic corrugated tanks help the height limit, while units with conservators often need that check. Heavy and tall cargo should also be checked against road and rail axle limits at the destination.
What to demand from the supplier
- Packed dimensions and weight per unit on the packing list, with total CBM and gross weight per container.
- A loading and lashing drawing: wooden blocking, steel straps to the container's lashing points, no stacking, and the maximum tilt allowed.
- What ships assembled: conservator, radiators and bushings fitted or packed separately, and how bushings and gauges are protected.
- Photos or video of loading, with container and seal numbers; see our factory acceptance testing guide for what to witness before shipment.
Shipping data requested with the quotation: - Packed size (L x W x H) and gross weight per unit - Proposed container type and units per container (20ft / 40ft / 40HC / open-top) - Conservator, radiators, bushings: fitted or separate - Loading and lashing drawing, maximum tilt - Incoterm and port: FOB [ ] / CIF [ ]; inland haul at destination: [ ]
Put the container plan in the same RFQ as the technical data and the price basis; the price escalation article shows how to lock price.
Which AISITE model to plan around
For 10kV distribution, start with the 10KV Oil Immersed Transformers (S11/S13). For 11–33kV networks up to 20 MVA, see the 20KV Oil Immersed Transformer (ground, pole or platform mounting). Indoor sites can use the 10KV Dry type transformer or the 20KV Dry type transformer, and packaged projects the compact substation range. For a non-standard size, ask for a Customized Transformer or an OEM transformer supplier to pack it to your container plan. See the full range on the products page.
Send your ratings, quantities and destination port through the contact form, WhatsApp +86 158 9666 3407 or sale@aisite-ast.com. We will return a quote with packed sizes, weights and a container plan. Request a transformer quote that includes shipping data and compare suppliers on landed cost.
Sources: representative 20ft, 40ft, high-cube, open-top and flat-rack container specifications published by carriers and freight forwarders (ISO 668 container sizes); AISITE product pages. The packed unit in the example is assumed. Actual dimensions, weights and equipment limits vary by product, carrier and route, so confirm them with the supplier and forwarder.

8615896663407